Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the service light on the Opel Crossland X.

Model: Vauxhall Crossland X MK 1 - Years 2017-2024
Part: Service Light

To manually reset the service light on your Opel Crossland X, it only takes a few seconds. Additionally, the necessary procedure does not require the use of any professional diagnostic tools, so to complete it, you just need to follow these steps. First, go inside the car and make sure it is turned off. Next, locate the "Check" button located below the display and hold it down. Simultaneously, insert the key and turn on the ignition. Finally, wait for about 10 seconds and the reset is complete.


Posted on 20 October 2024 by ScegliAuto



How to reset the "service" warning light on an Opel Crossland X
Vauxhall Crossland X (2017-2024 / MK 1) Before we can begin, we will have to go and sit on the driver's seat of our Opel Crossland X. Let's start by pressing and holding the "check" button
How to reset the service of the Opel Crossland X
Vauxhall Crossland X (2017-2024 / MK 1) Today's step-by-step instructions will show us how to reset the maintenance service light for the oil change on the Opel Crossland X. First, get into
How to reset the service light on the Opel Crossland X?
Vauxhall Crossland X (2017-2024 / MK 1) To reset the service light on the Opel Crossland X, we need to follow the following steps. 1) Press and hold the "Check" button located below the ins

    Frequently Asked Questions

    • Crossland X 2017-2024 - How to reset the Opel Crossland X service warning light? Read Answer

How to deactivate the safe lock on a Volkswagen Golf.

The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed.

Watch the video!


by ScegliAuto

More videos