Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Warning Light on the Opel Crossland X

Model: Vauxhall Crossland X MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Service warning light

Video tutorial

To reset the service warning light on the dashboard of the Opel Crossland X, follow these simple steps. First, turn on the vehicle's ignition.

Then press the button (always located on the dashboard) labelled "Check" until a wrench icon appears on the small screen of the onboard computer. At this point, hold the same button for the number of seconds displayed on the screen (10 seconds in total).

After this time, the message "Rehabilitation done" will appear, and you can release the button. The screen will display "No map for zone", and you can turn off the ignition.

And that's it!


Updated on 11 March 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Opel Crossland X?
How to Reset the Service Light on the Opel Crossland X?
Vauxhall Crossland X (2017-2024 / MK 1) To reset the Service light on the Opel Crossland X, press and hold the CHECK button located in the centre of the instrument panel. While continuing t…
How to Reset the "Service" Light on an Opel Crossland X
How to Reset the "Service" Light on an Opel Crossland X
Vauxhall Crossland X (2017-2024 / MK 1) Before you begin, sit in the driver's seat of your Opel Crossland X. Start by pressing and holding the "check" button located on the instrument clust…
How to Reset the Service Light on the Opel Crossland X
How to Reset the Service Light on the Opel Crossland X
Vauxhall Crossland X (2017-2024 / MK 1) To manually reset the service light on your Opel Crossland X takes just a few seconds. Moreover, the necessary procedure does not require any profess…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos