Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper on the Opel Combo

Model: Vauxhall Combo Combo E, MK 5 - Years 2019-2026
Part: Body

In this video, see how to remove the rear bumper on the Opel Combo. Work from underneath the vehicle, removing clips and screws along the entire perimeter of the bumper. Some may be dirty or damaged, making them difficult to remove. Once the lower screws are removed, unscrew those located laterally inside the boot, on both sides, then from the outside at the top of the bumper. Remove the plastic cover from the wheel arch. Inside the boot, there will also be connectors to detach, as the bumper incorporates the rear lights. Repeat the operation on the other side.

Updated on 21 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear headlight bulb of the Opel Combo 2018
How to replace the rear headlight bulb of the Opel Combo 2018
Vauxhall Combo (2012-2018 / Combo D, MK 4) If you want to replace the rear headlight bulb of your Opel Combo (year 2018) by yourself, just follow the procedure described in the following guide…
Removing the Front Bumper from an Opel Combo C
Removing the Front Bumper from an Opel Combo C
Vauxhall Combo (2001-2011 / Combo C, MK 3) Today, you will learn how to remove the front bumper from an Opel Combo C. First, open and lift the bonnet, then remove the plastic trims from the wh…
Removing the Radiator from an Opel Combo
Removing the Radiator from an Opel Combo
Vauxhall Combo (2001-2011 / Combo C, MK 3) In this video, we will see the instructions that will allow us to remove the engine cooling radiator from an Opel Combo CDTi. First, remove the front…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos