Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Anti-Roll Bar Support

Model: Vauxhall Corsa Corsa B - Years 1993-2000
Part: Control arm

The car's suspension features a unique mounting scheme to the vehicle's chassis: the anti-roll bar consists of two parts, the classic bar connecting the two suspension arms and a rod connected to the bar itself, supported by a front mount fixed to the crossmember located just below the bumper. To replace this support, unscrew the four bolts securing the plate to the crossmember and then the nut fastening the support to the bar. Proceed in reverse for the installation of the new one.

Updated on 19 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Shock Absorbers on an Opel Corsa?
How to Replace the Front Shock Absorbers on an Opel Corsa?
Vauxhall Corsa (2014-2019 / Corsa E) In this tutorial, see how to replace the front shock absorbers on an Opel Corsa. First, lift the front of the vehicle, taking the necessary safety pr…
How to Replace Spark Plugs on Opel Corsa
How to Replace Spark Plugs on Opel Corsa
Vauxhall Corsa (1993-2000 / Corsa B) Are the spark plugs on your Opel Corsa damaged? Here’s how to remove them. Lift the front bonnet and secure it. Remove the engine soundproofing panel…
Replacing the Stabiliser Bar on the Opel Corsa
Replacing the Stabiliser Bar on the Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) This guide shows you how to remove and replace the stabiliser bar on the Opel Corsa, following the instructions below. First, lift the vehicle and re…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos