Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on an Opel/Vauxhall Vivaro

Model: Vauxhall Vivaro MK 2 - Years: 2014, 2015, 2016, 2017, 2018, 2019
Part: Warning light – error code

See other generations:
Video tutorial

This video shows how to reset the service light on an Opel/Vauxhall Vivaro. The same procedure applies to a Renault Trafic.

Insert the ignition (but do not start the engine); press and hold the accelerator pedal; meanwhile, press the brake pedal fully three times. Once you have done this, release both pedals simultaneously and wait for ten seconds, then turn off the ignition.

At this point, turn it back on to check the outcome of the operation, which should be successful: the maintenance light is off. You can now start your journey.


Updated on 13 August 2026 by ScegliAuto


Related tutorials

How to reset the Service light on the Opel Vivaro?
How to reset the Service light on the Opel Vivaro?
Vauxhall Vivaro (2001-2014 / MK 1) To reset the Service light on the Opel Vivaro, press the accelerator pedal and simultaneously turn the key to position two to switch on the instrumen…
How to Reset the Service Light on an Opel Vivaro
How to Reset the Service Light on an Opel Vivaro
Vauxhall Vivaro (2019-2026 / MK 3, Vivaro C) To reset the service light on an Opel Vivaro, get in, insert the key into the ignition or press the Start button without starting the engine, turning…
How to reset the Service light on the Opel Vivaro?
How to reset the Service light on the Opel Vivaro?
Vauxhall Vivaro (2001-2014 / MK 1) On the Opel Vivaro, the Service light can be completely cleared by pressing the accelerator pedal and simultaneously turning the ignition key to posi…

    Frequently Asked Questions

    • Vivaro 2014-2019 - Where to find the radio code of the Opel Vivaro? Read answer

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos