Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the Service light on the Opel Vivaro?

Model: Vauxhall Vivaro MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Service warning light

See other generations:
Video tutorial

On the Opel Vivaro, the Service light can be completely cleared by pressing the accelerator pedal and simultaneously turning the ignition key to position two to activate the dashboard. At this point, press the brake pedal three times in succession, then turn the key counterclockwise to switch off the dashboard.

This way, you can verify that turning the key clockwise again and turning on the dashboard, the Service light has been successfully cleared from the display.


Posted on 21 September 2026 by ScegliAuto


Related tutorials

How to reset the Service light on the Opel Vivaro?
How to reset the Service light on the Opel Vivaro?
Vauxhall Vivaro (2001-2014 / MK 1) To reset the Service light on the Opel Vivaro, press the accelerator pedal and simultaneously turn the key to position two to switch on the instrumen…
How to Reset the AdBlue Warning Light on the Opel Vivaro?
Vauxhall Vivaro (2019-2026 / MK 3, Vivaro C) You can clear the AdBlue warning light on the Opel Vivaro by topping up the necessary amount of additive liquid: to do this, open the fuel flap and l…
How to Reset the Service Light in an Opel Vivaro A?
How to Reset the Service Light in an Opel Vivaro A?
Vauxhall Vivaro (2014-2019 / MK 2) Resetting the service light in an Opel Vivaro A is not complicated; it takes just a few seconds, requires no electronic device to connect to the vehi…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos