Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Inspection Light on the Opel Astra "G"

Model: Vauxhall Astra Astra G - Years 1998-2006
Part: Service warning light

In this video, see how to eliminate the inspection warning, the "INSP" message that appears on the speedometer dial above the total mileage. With the vehicle off, insert the key into the ignition and press the button/dial located between the speedometer and the fuel gauge. While holding it down, turn the key to the "on" position without starting the engine. The message will flash, and then four lines will appear. At this point, release the button and turn off the ignition. Upon the next restart, the light will have been cleared.

Updated on 18 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Inspection: how to reset the warning from the dashboard of the Opel Astra H.
Inspection: how to reset the warning from the dashboard of the Opel Astra H.
Vauxhall Astra (2004-2010 / Astra H) On the Opel Astra H, the inspection warning can be reset directly from the display by accessing the maintenance menu according to the sequence shown …
How to Reset the Inspection Light on the Opel Astra H 2004
How to Reset the Inspection Light on the Opel Astra H 2004
Vauxhall Astra (2004-2010 / Astra H) To successfully complete the manual reset of the inspection light on your Opel Astra H (2004), follow the steps described in this guide. First, sit i…
How to reset the service light on the Opel Astra J
How to reset the service light on the Opel Astra J
Vauxhall Astra (2009-2016 / Astra J) In this video we can see how to reset the service light on an Opel Astra version J: Like almost all cars, before resetting the service light, we must…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos