Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Car Suspension

Model: Vauxhall Vectra Vectra B, MK 2 - Years 1995-2002
Part: Suspension system

This practical guide shows how to replace the suspension of your car. The suspension helps absorb the stresses that reach the vehicle through the compression and expansion of a gas contained within. Each suspension consists of a sealed rubber spring that utilises the compressed air generated by the compressor. The first step is to lift the car with a jack and remove the wheel. Next, remove the wheel arch liner and the shock absorber. You can then proceed to install the new part. For the replacement of the passenger side suspension, follow a similar procedure.

Updated on 20 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Shock Absorbers on an Opel Vectra C
How to Replace the Rear Shock Absorbers on an Opel Vectra C
Vauxhall Vectra (2002-2008 / Vectra C, MK 3) This guide shows how to replace the rear shock absorbers on an Opel Vectra C. The first step is to lift the vehicle and remove the rear wheels. Using…
Replacement of Front Shock Absorber Spring
Replacement of Front Shock Absorber Spring
Vauxhall Vectra (2002-2008 / Vectra C, MK 3) Lift the vehicle on a hydraulic lift or suitable axle stands and remove the front wheel; proceed to detach the link connecting the shock absorber to …
Replacing Your Car's Bearings
Replacing Your Car's Bearings
Vauxhall Vectra (2002-2008 / Vectra C, MK 3) Typically, changing the bearings of your car is not a task you do yourself, and you rely on your trusted mechanic. However, if you want to save some …

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos