Do it yourself
Frequently asked questions about cars and motorcycles

Repairing the Boot Lock

Model: Vauxhall Zafira Zafira B, A05, MK 2 - Years 2005-2011
Part: Trunk lock

Repairing the lock can be approached in two ways: either purchase the entire complete block or replace the motor that actuates the lock. The fault in these types of motors lies in the burning of the copper brushes and the commutator. Once the lock block is disassembled, open the plastic cover to access the mechanics. Manually rotate the motor to bring the locking lever to the rest position, remove the gear wheel, and then the motor. These motors are readily available on the market; the only modification required is to recover the worm screw and mount it onto the shaft of the new motor. The total length of the motor, including the shaft, must be 59 mm. To recover the worm screw, cut the shaft of the motor and then use a rubber mallet to push out the remaining shaft. If the recovered motor shaft is not the same length, a modification is necessary by gluing the worm screw to the shaft of the motor using cyanoacrylate glue. Reassemble the motor and gear wheel in their housing, close the cover, and manually return the lever to the stop position.

Updated on 2 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Vauxhall Zafira (2005-2011 / Zafira B, A05, MK 2) This guide provides the main instructions for removing and replacing the rear tailgate lock on an Opel Zafira. First, open the boot tailgate and begi…
Vauxhall Zafira (2011-2019 / Zafira C, MK 3) The instructions in this guide will allow you to disable the automatic door locking on an Opel Zafira, in simple and quick steps. First, get inside t…
Vauxhall Zafira (2005-2011 / Zafira B, A05, MK 2) In this brief guide, we will provide instructions on how to remove all the rear seats from an Opel Zafira in simple steps. First, open the rear doors…

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos