Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Central Locking on the Opel Zafira

Model: Vauxhall Zafira MK 2, A05, Zafira B - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Warning light – error code

See other generations:
Video tutorial

Today's guide will show you the main steps to reset the central locking on the Opel Zafira. First, open the bonnet and begin by disconnecting both battery terminals to perform a general reset of the control unit and locks; then remove the cover of the fuse box and check that the central locking fuse is in good condition (replace it if necessary), as shown in the video.

At this point, reconnect the battery and finally check the operation of the locks.


Updated on 23 August 2026 by ScegliAuto


Related tutorials

Where are the fuses located in the Opel Zafira?
Where are the fuses located in the Opel Zafira?
Vauxhall Zafira (2005-2011 / MK 2, A05, Zafira B) The fuses in the Opel Zafira are located inside the designated fuse boxes: this model has two. The first is situated in the engine compartment, next …
How to Disable the Automatic Door Locking on an Opel Zafira
How to Disable the Automatic Door Locking on an Opel Zafira
Vauxhall Zafira (2011-2019 / Zafira C, MK 3) The instructions in this guide will allow you to disable the automatic door locking on an Opel Zafira, in simple and quick steps. First, get inside t…
Removing the Rear Tailgate Lock on an Opel Zafira
Removing the Rear Tailgate Lock on an Opel Zafira
Vauxhall Zafira (2005-2011 / MK 2, A05, Zafira B) This guide provides the main instructions for removing and replacing the rear tailgate lock on an Opel Zafira. First, open the boot tailgate and begi…

Other guides you may be interested in

    Frequently Asked Questions

    • Zafira 2011-2019 - What does code 89 mean on the Opel Zafira? Read answer
    • Zafira 1999-2005 - What does the P1634 error mean in the Opel Zafira? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos