Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the TPMS light on the Opel Corsa

Model: Vauxhall Corsa Corsa E - Years 2014-2019
Part: Tire Warning Light

The TPMS (Tire Pressure Monitoring System) reset of the 2016 Opel Corsa E model is a very simple operation to perform independently. To begin the reset, turn on the vehicle's instrument panel and then press the MENU button located on the left-hand side of the steering wheel. Continue scrolling through the menu by using the wheel located on the same lever until you select the option for tire pressure. Complete the reset by pressing the SET button, located above the lever, for a few seconds. Once completed, you can turn off the vehicle and restart it to confirm that the reset was successful.


Posted on 30 October 2023 by ScegliAuto



How to reset the TPMS warning light on an Opel Corsa?
Vauxhall Corsa (2014-2019 / Corsa E) The TPMS warning light is nothing more than the warning light that indicates an inadequate (generally too low) level in the pressure of our tires. If
How to reset the TPMS light on Opel Corsa F.
Vauxhall Corsa (2019-2024 / Corsa F) If the TPMS light on the instrument panel of your Opel Corsa F (year 2019-2023) comes on despite there being no punctures, then you must proceed with
How to turn off the tire pressure warning light on the Opel Corsa.
Vauxhall Corsa (2006-2014 / Corsa D) Below we will see the procedure that will allow us to reset the tire pressure warning light of the Opel Corsa; before performing the reset, it is nec

Other guides that may interest you

How to deactivate the safe lock on a Volkswagen Golf.

The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed.

Watch the video!


by ScegliAuto

More videos