Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on an Opel Insignia

Model: Vauxhall Insigna MK 1, Insigna A - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Timing belt

See other generations:
Video tutorial

Today, you will learn how to remove the timing belt on an Opel Insignia. Lift the car on a ramp and remove the front wheel using a screwdriver, then take off the wheel arch liner.

Remove the timing belt cover, use a socket to loosen the tensioner pulley, and slide the belt out of its seat. With a socket, unscrew the locking pin of the pulley.

After removing the belt, proceed to fit the new belt. Place the new belt on the pulley and tighten it, securing the tensioner and the pulley pin. Finish by refitting the wheel arch liner and the front wheel, lowering the car back to the ground.


Updated on 31 August 2026 by ScegliAuto


Related tutorials

Replacing the Timing Belt on the Opel Insignia 2.0 CDTI
Replacing the Timing Belt on the Opel Insignia 2.0 CDTI
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) Here are the instructions for removing and replacing the timing belt on the Opel Insignia 2.0 CDTI. First, open the bonnet and remove the timing belt…
How to Replace the Timing Belt on the Opel Insignia
How to Replace the Timing Belt on the Opel Insignia
Vauxhall Insigna (2017-2026 / MK 2, Insigna B) To replace the timing belt on the Opel Insignia, lift the car so that you can remove the front right wheel and the corresponding wheel arch liner. Un…
Replacement of the timing belt of the Opel Insignia 2.0 CDTI
Replacement of the timing belt of the Opel Insignia 2.0 CDTI
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) In this guide we will see the steps that will allow us to disassemble and replace the timing belt of the Opel Insignia 2.0 CDTI. First of all, we ope…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos