Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Mokka
    4. : Where is the oil filter located in the Opel Mokka?

Vauxhall Mokka - Video tutorial

Model: Vauxhall Mokka Mokka A - Years 2012-2019
Part: Oil filter
Operation: Where is the oil filter located in the Opel Mokka?

In this video, we can see where the oil filter is located in the Opel Mokka and how to proceed in case we need to replace it. This operation is obviously included in the classic oil change that needs to be done periodically. As shown, the filter is located in the lower area of the engine and is accessible by going underneath the vehicle. Before removing the filter, let's locate the drain plug, then unscrew it with a socket wrench and let all the oil in the system drain out. At this point, unscrew the filter housing, replace it, and put everything back together. Finally, pour the necessary amount of oil through the upper hole.


Posted on 7 December 2023 by ScegliAuto

    Frequently Asked Questions

    • Mokka 2012-2019 - Where is the oil filter located on Opel Mokka? Read Answer
    • Mokka 2012-2019 - Where is the oil filter on the Opel Mokka 1.7 CDTI located? Read Answer
    • Mokka 2012-2019 - Where is the Opel Mokka oil filter located? Read Answer
    • Mokka 2012-2019 - Where is the oil filter of the Opel Mokka 1.4 turbo located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos