Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the oil filter on the Opel Mokka

Model: Vauxhall Mokka Mokka A - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Oil filter

See other generations:
Video tutorial

The oil filter on the Opel Mokka is located under the bonnet, specifically to the right of the engine. To replace the filter, first remove the cap using a 24 mm spanner.

After removing the filter, proceed to change the engine oil before installing the new filter. Remove the cap from the oil reservoir, then remove the nut securing the oil sump with a 16 mm spanner, allowing the oil to drain out before closing the nut. Install the new oil filter and replace the cap using a 24 mm spanner.

Top up the oil reservoir with the necessary amount of oil and close the cap.


Updated on 2 November 2026 by ScegliAuto


Related tutorials

Removing the Oil Filter from an Opel Mokka
Removing the Oil Filter from an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Do you want to carry out maintenance on your Opel Mokka without spending money on labour? Let's see in this video how to effectively remove the oil f…
Changing Engine Oil and Oil Filter on Opel Mokka 1.6 CDTI
Changing Engine Oil and Oil Filter on Opel Mokka 1.6 CDTI
Vauxhall Mokka (2012-2019 / Mokka A) In this guide, we will see how to change the engine oil and oil filter on an Opel Mokka 1.6 CDTI. First, lift the vehicle and using a socket wrench, …
What Does the "MIL" Light Mean on an Opel Mokka?
What Does the "MIL" Light Mean on an Opel Mokka?
Vauxhall Mokka (2012-2019 / Mokka A) When the "MIL" (Malfunction Indicator Lamp) light activates on the dashboard of your Opel Mokka, it indicates a general malfunction with the emission…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos