Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Oil Filter from an Opel Mokka

Model: Vauxhall Mokka Mokka A - Years 2012-2019
Part: Oil filter

Do you want to carry out maintenance on your Opel Mokka without spending money on labour? Let's see in this video how to effectively remove the oil filter yourself. First, lift the bonnet and secure it. Once you locate the oil filter housing, use a socket spanner to unscrew the large central bolt on the filter housing. Remove the cap from the filter housing, extract the used filter, and fit the new one. Close the oil filter housing with the appropriate cap, check the maintenance performed for safety, and close the engine compartment lid.

Updated on 27 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the engine oil and oil filter of the Opel Mokka 1.6
How to replace the engine oil and oil filter of the Opel Mokka 1.6
Vauxhall Mokka (2012-2019 / Mokka A) Today's video will show us the process of replacing the engine oil and oil filter, performing the routine maintenance check of the Opel Mokka. First,…
Changing Engine Oil and Oil Filter on Opel Mokka 1.6 CDTI
Changing Engine Oil and Oil Filter on Opel Mokka 1.6 CDTI
Vauxhall Mokka (2012-2019 / Mokka A) In this guide, we will see how to change the engine oil and oil filter on an Opel Mokka 1.6 CDTI. First, lift the vehicle and using a socket wrench, …
How to Remove the Petrol Filter on an Opel Mokka
How to Remove the Petrol Filter on an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Before you start, engage first gear and activate the handbrake on your Opel Mokka. Begin by lifting the rear of the vehicle. This will give you acces…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos