Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Cabin Air Filter Replacement

Model: Vauxhall Insigna MK 1, Insigna A - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Cabin air filter

See other generations:
Video tutorial

The cabin air filter is located on the passenger side, just behind the glove compartment: to access the air duct housing where the filter is contained, remove the glove compartment: open the door and unscrew the four screws securing the glove compartment to the dashboard and remove it by disconnecting the courtesy light power cable; you can now access the cabin air filter housing and release the three clips to remove the cover, extract the old filter, ensure there are no dirt residues inside, and insert the new one before reassembling the glove compartment.


Updated on 21 February 2026 by ScegliAuto


Related tutorials

Cabin Air Filter Replacement
Cabin Air Filter Replacement
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) The cabin air filter is located on the passenger side, behind the glove compartment: proceed by removing the compartment itself by unscrewing the sec…
How to Replace the Cabin Air Filter in an Opel Insignia
How to Replace the Cabin Air Filter in an Opel Insignia
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) Among the maintenance tasks you can perform on your Opel Insignia A (2008-2017) is the replacement of the cabin air filter. This is a very important …
How to Replace the Cabin Air Filter on Opel Insignia
How to Replace the Cabin Air Filter on Opel Insignia
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) If you want to change the cabin air filter on your first-generation Opel Insignia yourself, follow the procedure in this guide. First, purchase a new…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos