Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Opel Combo E

Model: Vauxhall Combo Combo E, MK 5 - Years 2019-2026
Part: Service warning light

To manually reset the service light on the instrument cluster display of your Opel Combo E, follow these steps. First, enter the cabin and ensure the car is completely off. At this point, locate the two buttons below the display and press the left button. At the same time, insert the key and start the car to initiate the brief ten-second countdown. Wait for it to finish and then release the button to complete the service light reset.

Updated on 3 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Opel Combo?
How to Reset the Service Light on the Opel Combo?
Vauxhall Combo (2001-2011 / Combo C, MK 3) To reset the Service light on the Opel Combo, press and hold the button located on the right side of the instrument panel while it is off. Continue h…
How to Reset the "Service" Light on an Opel Combo
How to Reset the "Service" Light on an Opel Combo
Vauxhall Combo (2001-2011 / Combo C, MK 3) Before starting, sit in the driver's seat of your Opel Combo. Begin by pressing and holding the "A" button. After about 3 seconds, press the brake pe…
How to reset the Service light on the Opel Combo?
How to reset the Service light on the Opel Combo?
Vauxhall Combo (2012-2018 / Combo D, MK 4) To reset the Service light on the Opel Combo, sit inside the cabin and press the accelerator pedal all the way down. While holding it down, turn the …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos