Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

A Mistake to Avoid When Resetting the Service Light on the Vauxhall/Opel Vivaro

Model: Vauxhall Vivaro Vivaro C, MK 3 - Years 2019-2026
Part: Service warning light

This video explains how easy it is to make a major mistake that prevents the reset of the Vauxhall/Opel Vivaro. The YouTuber suggests this reset method: turn on the ignition, press the accelerator pedal fully three times. On the third press, the light goes off, but it only takes a trip around the block for it to come back on. After a headache, he discovered that the reason was because he had left the door of his vehicle open. However, we can suggest another method: at the end of the indicator stalk, there is a button that you should hold down. The display on the odometer will show "0". Release the button, and the reset is complete (but the door must always remain closed!).

Updated on 5 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Opel Vivaro
How to Reset the Service Light on the Opel Vivaro
Vauxhall Vivaro (2019-2026 / Vivaro C, MK 3) Today, you will learn how to reset the service light on the Opel Vivaro independently and for free, without using a diagnostic computer. To reset the…
Resetting the service light on the Opel Vivaro
Resetting the service light on the Opel Vivaro
Vauxhall Vivaro (2014-2019 / MK 2) Today's instructions will allow us to reset the service light for routine maintenance on the Opel Vivaro. First, get inside the vehicle and turn on t…
How to Reset the Service Light on the Opel Vivaro?
How to Reset the Service Light on the Opel Vivaro?
Vauxhall Vivaro (2019-2026 / Vivaro C, MK 3) To reset the Service light on the Opel Vivaro, press and hold the CHECK button located in the centre of the instrument cluster while it is off. Conti…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos