Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal of Rear Windscreen Washer Nozzle

Model: Vauxhall Corsa Corsa B - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
Part: Windshield washer nozzle

See other generations:
Video tutorial

If the rear windscreen washer nozzle becomes blocked, preventing the cleaning of the rear window, it is necessary to clean it. Using a plastic tool to avoid damaging the bodywork, gently remove the nozzle from its housing, taking care with the plastic tube connected to it. Pull the washer nozzle while holding the tube firmly until it is completely extracted and separated from the tube.

If you do not have a replacement nozzle, clean it using compressed air or, with the help of a pin, remove any dirt inside it. Refit the nozzle, keeping the tube secure to prevent it from retracting into the housing.


Updated on 2 February 2026 by ScegliAuto


Related tutorials

Replacement of Windscreen Washer Pump on Opel Corsa C
Replacement of Windscreen Washer Pump on Opel Corsa C
Vauxhall Corsa (2000-2006 / Corsa C) In this video tutorial, you will learn how to remove and replace the windscreen washer pump on an Opel Corsa C, third generation. First, open the bon…
How to Replace the Windscreen Washer Pump on the Opel Corsa
How to Replace the Windscreen Washer Pump on the Opel Corsa
Vauxhall Corsa (1993-2000 / Corsa B) In this video tutorial, you will learn how to remove and replace the windscreen washer pump on the Opel Corsa, following the instructions provided be…
Dismantling and Cleaning the Throttle Body
Dismantling and Cleaning the Throttle Body
Vauxhall Corsa (1993-2000 / Corsa B) This video shows how to dismantle certain parts to clean the throttle body of your car. If your engine has trouble revving or experiences irregular i…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos