Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlamp Bulb on an Opel Corsa E

Model: Vauxhall Corsa Corsa E - Years 2014-2019
Part: Tail light

Today, learn how to replace the right rear headlamp bulb on an Opel Corsa model E. First, open the boot and remove the Torx screw located on the boot panel. Once the screw is removed, pull the headlamp outwards. To remove it, simply pull it out with your hands and then disconnect the connector. Extract the bulb from the headlamp and insert a new one. After inserting the bulb, refit the headlamp onto the car. To refit the headlamp, simply insert it back in and secure it with the screw.

Updated on 17 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear headlight bulb of an Opel Corsa?
How to replace the rear headlight bulb of an Opel Corsa?
Vauxhall Corsa (2014-2019 / Corsa E) To replace the rear headlight bulb of an Opel Corsa, start by opening the rear hatch. Find the access panel inside the trunk, usually located behind …
How to replace the rear headlight bulb of the Opel Corsa
How to replace the rear headlight bulb of the Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) To replace the rear headlight bulb of the Opel Corsa, we must first open the trunk and unscrew the two screws of the headlight; once the screws are r…
How to replace the rear headlight bulb of the Opel Corsa model E
How to replace the rear headlight bulb of the Opel Corsa model E
Vauxhall Corsa (2014-2019 / Corsa E) The steps to replace the rear headlight bulb of the Opel Corsa model E are simple and quick to perform independently. The first step is to remove the…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos