Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulb of the Opel Corsa

Model: Vauxhall Corsa Corsa C - Years 2000-2006
Part: Tail light bulb

To replace the rear headlight bulb of the Opel Corsa, we must first open the trunk and unscrew the two screws of the headlight; once the screws are removed, we can extract the headlight and disconnect its connector. We open the dome light, unscrew the star screw and remove the burnt bulb to insert the new bulb, adjust the gasket if necessary, and close the dome light; connect the connector to the headlight and insert the headlight into its housing and then secure it with the two screws. To replace the right rear headlight, we must follow the same steps. We conclude by turning on the headlight to check that everything is working properly.

Posted on 8 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the rear fog light of the Opel Corsa?
How do you replace the rear fog light of the Opel Corsa?
Vauxhall Corsa (2014-2019 / Corsa E) In order to replace the rear fog light of the Opel Corsa, you need to lift the rear hatch: once this is lifted, you can use an object like a screwdri…
How to Replace the Rear Light Bulbs on an Opel Corsa
How to Replace the Rear Light Bulbs on an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Below are the instructions needed to remove and replace the rear light bulbs on an Opel Corsa. First, open the boot lid and start by opening the side…
How to disassemble the rear headlight of the Opel Corsa
How to disassemble the rear headlight of the Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) To successfully disassemble one of the two rear headlights of your Opel Corsa D on your own, just follow the steps described in the following guide. …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos