Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure monitor on the Opel Crossland.

Model: Vauxhall Crossland X MK 1 - Years 2017-2024
Part:

If the tire pressure alarm light on your Opel Crossland continues to stay on even though there is no puncture or loss of pressure, then it is necessary to proceed with the manual reset of the light. Below we will discover together how to perform this operation correctly and safely. First, get into the car and start the instrument panel, then locate the "Set" button on the left side of the dashboard and hold it down for a few seconds. Finally, wait for the tire pressure light reset to complete and then release the "Set" button.

Posted on 8 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure sensor on the Opel Crossland.
How to reset the tire pressure sensor on the Opel Crossland.
Vauxhall Crossland X (2017-2024 / MK 1) When the tire pressure warning appears on the instrument panel, it may indicate a possible puncture; let's see how to reset the TPMS on the Opel Cros…
How to reset the tire pressure warning light on Opel Crossland X
How to reset the tire pressure warning light on Opel Crossland X
Vauxhall Crossland X (2017-2024 / MK 1) In this short and simple guide we will see the necessary instructions on how to reset the tire pressure warning light on the Opel Crossland X; All fo…
To reset the tire pressure warning light on the Opel Crossland X.
To reset the tire pressure warning light on the Opel Crossland X.
Vauxhall Crossland X (2017-2024 / MK 1) If you are sure that there is no pressure loss or puncture on your Opel Crossland X and you want to find out how to manually reset the tire warning l…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos