Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear taillight of an Opel Adam

Model: Vauxhall Adam MK 1 - Years 2013-2019
Part: Tail light

In this video we see how to change the rear light cluster of an Opel Adam: it is a very simple thing because it is held together by a single fixing piece inside the trunk. We will start by removing this cover grille: just remove these two clips and it comes off easily. From here we can easily access the light cluster. No tools are needed, there is only a plastic screw that we need to rotate counterclockwise, and this was the screw that held the entire light cluster in place. Now from the outside we can remove it in one piece; we just need to be careful because we still have the electrical connectors attached inside, but it is just a clip and comes off easily. We will proceed in reverse to put everything back in place with the new light cluster, we just need to be careful with the safety pins, where some points must fit precisely.

Posted on 6 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Indicator Bulb on an Opel Adam
How to Replace the Indicator Bulb on an Opel Adam
Vauxhall Adam (2013-2019 / MK 1) In today’s article, you will learn how to replace the side indicator bulb on an Opel Adam. No tools are required for this operation. To replace the b…
How to replace the engine air filter of the Opel Adam
How to replace the engine air filter of the Opel Adam
Vauxhall Adam (2013-2019 / MK 1) If you want to replace the engine air filter of your Opel Adam by yourself, just follow the steps described below. First of all, you need to get a To…
How to replace the cabin air filter of the Opel Adam
How to replace the cabin air filter of the Opel Adam
Vauxhall Adam (2013-2019 / MK 1) These short and simple steps will show us how to replace the cabin air filter or the pollen filter of the Opel Adam. First, we open the front passeng…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos