Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the spark plug on the Peugeot Streetfight 3, lift the seat of the motorcycle and unscrew all the screws located inside the under-seat compartment. This will allow you to completely remove the compartment for access to the lower components. Once the storage compartment is removed, locate the coil, which must be disconnected, and pull the spark plug from its housing. After removing the spark plug, replace it with a new spare part and reassemble all previously removed parts.

Updated on 29 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Spark Plug on a Peugeot Speedfight 3
How to Replace the Spark Plug on a Peugeot Speedfight 3
Speedfight 3 Below are the steps that will allow you to remove and replace the spark plug of the engine on a Peugeot Speedfight 3 scooter. First, place the centra…
How do you replace the exhaust of the Peugeot Speedfight 3?
Speedfight 3 In order to replace the exhaust pipe of the Peugeot Speedfight 3, you need to loosen the screws that secure the upper covering panel of the exhaust p…
How do you replace the fairing of the Peugeot Speedfight 3?
How do you replace the fairing of the Peugeot Speedfight 3?
Speedfight 3 In order to replace the entire fairing of the Peugeot Speedfight 3, you need to remove the panels that make it up: you will need to start with the fr…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos