Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plug on a Peugeot Speedfight 3

Model: Peugeot Speedfight 3
Part: Spark plugs

Video tutorial

Below are the steps that will allow you to remove and replace the spark plug of the engine on a Peugeot Speedfight 3 scooter. First, place the central stand and start by opening the seat and removing the battery by disconnecting both terminals; then remove the under-seat compartment as shown in the video.

At this point, disconnect the spark plug connector and use a socket spanner with an extension to unscrew and remove it; install and hand-tighten the new spark plug of the correct type and with the same thread pitch, finally tightening it with a spanner!


Updated on 26 August 2026 by ScegliAuto


Related tutorials

How to Replace the Spark Plug on the Peugeot Streetfight 3?
How to Replace the Spark Plug on the Peugeot Streetfight 3?
Speedfight 3 To replace the spark plug on the Peugeot Streetfight 3, lift the seat of the motorcycle and unscrew all the screws located inside the under-seat comp…
How to Replace the Drive Belt on the Peugeot Speedfight 3
How to Replace the Drive Belt on the Peugeot Speedfight 3
Speedfight 3 Today's guide will show you the steps to remove and replace the drive belt on the Peugeot Speedfight 3 scooter. First, place your scooter on the cent…
How to Replace the Exhaust on a Peugeot Speedfight 3
Speedfight 3 To replace the exhaust on a Peugeot Speedfight 3, loosen the screws securing the upper cover panel of the exhaust, located on the right side of the b…

How to Change the Engine Oil in a Triumph Speed Triple

In this tutorial, we will see how to change the engine oil in a Triumph Speed Triple, a very simple and quick operation. First, ensure that the engine is cool enough to operate safely, then position a container underneath the bike, locate the drain plug, and unscrew it using a socket wrench. Allow all the oil in the system to drain out, unscrew the old filter, and tighten both the replacement and the plug. At this point, simply pour the necessary amount of oil through the designated upper hole.

Watch the video!


by ScegliAuto

More videos