Do it yourself
Frequently asked questions about cars and motorcycles

What to do if the engine warning light comes on in a Peugeot 107

Model: Peugeot 107 MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Warning light – error code

Video tutorial

In this video, you can see a Peugeot 107 with the engine warning light on; diagnosis is not necessary, but there are power loss issues and difficulty in the engine revving up, indicating a problem in the ignition system of one of the cylinders. Remove the air filter box to access the coils, each with its own electronics; the fault will likely be in one of these that has burnt out. An empirical method is to connect them one at a time, leaving the other two connected.

When performing this test, replace the air filter to prevent the engine from sucking in anything. Once the faulty one is identified, remove it. The diagnostic system is then illustrated using a tester.

At this point, the spark plugs are also changed, but this must be done with the engine cold, or you will damage the threads. For reassembly, a clever method is suggested to avoid losing the clip that holds the spark plug for its reinstallation.

Then, replace the air filter. To reset the error, on this vehicle, it is sufficient to disconnect the negative terminal for at least 15 minutes and then reconnect it. (Keep the radio code handy).


Updated on 21 October 2026 by ScegliAuto


Related tutorials

Peugeot 107 (2005-2014 / MK 1) On the Peugeot 107, the pollen filter is located not behind the glove compartment (as is the case with many car models), but rather underneath it. As…
Peugeot 107 (2005-2014 / MK 1) To be able to locate the OBD port inside your Peugeot 107 on your own, you just need to follow these steps. Fortunately, you don't need to disassembl…
Peugeot 107 (2005-2014 / MK 1) If you want to replace the engine air filter of your Peugeot 107 on your own, just pay attention to the various steps described in the following guid…

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos