Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Battery in the Peugeot 508

Model: Peugeot 508 MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Battery

See other generations:
Video tutorial

Today's information will show you how to remove and replace the battery in the Peugeot 508, following the instructions below. First, open the bonnet of the vehicle and start by removing the plastic cover located at the top of the battery.

Then, disconnect the ECU cables to access the battery, as shown in the video. At this point, remove and replace the battery by disconnecting both terminals (positive and negative).

Install the new suitable battery of the correct type and with the same amperage, and reassemble everything!


Updated on 25 October 2026 by ScegliAuto


Related tutorials

Peugeot 508 (2010-2018 / MK 1) Open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard, then lift the front bonnet. Once the …
Peugeot 508 (2010-2018 / MK 1) Before you begin, open the front bonnet of your Peugeot 508. Start by unfastening the clip that secures the positive terminal to the battery, then di…
Peugeot 508 (2018-2026 / MK 2) In this short video, you will see how to replace the battery in the remote key of a Peugeot 508. This tutorial is also valid for other car models tha…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos