Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Battery from a Peugeot 508

Model: Peugeot 508 MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Battery

See other generations:
Video tutorial

Before you begin, open the front bonnet of your Peugeot 508. Start by unfastening the clip that secures the positive terminal to the battery, then disconnect the terminal itself. Next, unclip and remove the battery cover.

After that, loosen the screw that secures the negative terminal to the battery and disconnect it. At this point, move the control unit located above the battery, then unclip the clips that secure the battery to its housing. Once you complete this step, extract the battery from its location, and you will have finished the disassembly.


Updated on 17 April 2026 by ScegliAuto


Related tutorials

Replacing the Key Battery for the Peugeot 508
Replacing the Key Battery for the Peugeot 508
Peugeot 508 (2018-2026 / MK 2) In this short video, you will see how to replace the battery in the remote key of a Peugeot 508. This tutorial is also valid for other car models tha…
How to replace the battery in the Peugeot 508?
How to replace the battery in the Peugeot 508?
Peugeot 508 (2010-2018 / MK 1) To replace the battery in the Peugeot 508, open the bonnet to access the components in the engine bay. The battery is located on the right side and m…
Replacing the Battery in the Peugeot 508
Replacing the Battery in the Peugeot 508
Peugeot 508 (2010-2018 / MK 1) Today's information will show you how to remove and replace the battery in the Peugeot 508, following the instructions below. First, open the bonnet …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos