Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Outside Air Temperature Sensor on the Peugeot 308

Model: Peugeot 308 T7, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014

See other generations:
Video tutorial

The instructions in this guide will show you how to remove and replace the outside air temperature sensor on the Peugeot 308. First, move to the outside of the vehicle and start by removing the plastic cover located under the wing mirror, as well as the indicator cover; you will find the outside air temperature sensor under the rear-view mirror, as shown in the video.

At this point, disconnect its electrical connector to remove it and replace it with the new one, then check its proper functioning before reassembling everything!


Updated on 26 October 2026 by ScegliAuto


Related tutorials

How to Replace the Diesel Filter on a Peugeot 308?
How to Replace the Diesel Filter on a Peugeot 308?
Peugeot 308 (2007-2014 / T7, MK 1) To replace the diesel filter on a Peugeot 308, open the bonnet to access the components in the engine bay. The diesel filter is located immediately t…
How to Reset the "Service" Light on a Peugeot 308
How to Reset the "Service" Light on a Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) Before you start, sit in the driver's seat of your Peugeot 308. Press and hold the button located in the bottom right corner of the instrument panel,…
How do you replace the battery of the Peugeot 308?
How do you replace the battery of the Peugeot 308?
Peugeot 308 (2007-2014 / T7, MK 1) To replace the battery installed on the Peugeot 308, you need to open the hood so that you can access the components in the engine compartment: the b…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos