Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Gear Oil in a Peugeot Partner Van?

Model: Peugeot Partner Tepee MK 1 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Transmission fluid

See other generations:
Video tutorial

This tutorial shows how to change the gear oil in a Peugeot Partner van, a very simple and quick operation. First, wait for the engine to be completely cold.

Then, lift the front of the vehicle, ensuring all necessary safety measures are taken, and unscrew both the fill bolt and the drain bolt. Allow all the oil in the gearbox to drain out, tighten the lower bolt, and add the required amount of oil through the designated hole.


Updated on 31 October 2026 by ScegliAuto


Related tutorials

How to Change the Gearbox Oil of the Peugeot Partner?
How to Change the Gearbox Oil of the Peugeot Partner?
Peugeot Partner Tepee (1996-2013 / MK 1) To change the gearbox oil of the Peugeot Partner, lift the car using a jack and locate the gearbox underneath the vehicle, near the engine compartmen…
How to Replace the Gear Knob on a Peugeot Partner Van?
How to Replace the Gear Knob on a Peugeot Partner Van?
Peugeot Partner Tepee (1996-2013 / MK 1) In this tutorial, you will see how to replace the gear knob on a Peugeot Partner van, an extremely simple and quick operation. First, grasp the base …
Wiring Diagram for the Peugeot Partner Van
Wiring Diagram for the Peugeot Partner Van
Peugeot Partner Tepee (2008-2018 / B9) In this valuable video, you can find the complete wiring diagram for the Peugeot Partner Van, including wiring indications and a series of handwritte…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos