Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Gearbox Oil of the Peugeot Partner?

Model: Peugeot Partner Tepee MK 1 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Transmission fluid

See other generations:
Video tutorial

To change the gearbox oil of the Peugeot Partner, lift the car using a jack and locate the gearbox underneath the vehicle, near the engine compartment. Once the gearbox and its drain plug are identified, open the drain plug and collect the used oil in a suitably positioned container.

After draining all the old oil, top up with new oil using a tube and syringe as shown in the video. After replacing the oil, close the reservoir with the appropriate cap.


Updated on 29 May 2026 by ScegliAuto


Related tutorials

Gear Oil Replacement on Peugeot Partner - Citroen Berlingo
Gear Oil Replacement on Peugeot Partner - Citroen Berlingo
Peugeot Partner Tepee (2008-2018 / B9) In this video, we will see how to replace the transmission oil on a Peugeot Partner, as well as on a Citroen Berlingo. First, lift the vehicle from t…
How to Change the Engine Oil on a Peugeot Partner
How to Change the Engine Oil on a Peugeot Partner
Peugeot Partner Tepee (2018-2026 / MK 3) To change the engine oil on a Peugeot Partner, access the underside of the engine bay, where you will find the oil drain plug: this should be unscrew…
How to Replace the Gear Cable on a Peugeot Partner
How to Replace the Gear Cable on a Peugeot Partner
Peugeot Partner Tepee (2018-2026 / MK 3) Replacing the gear cable is more complex than it may seem: lift the vehicle and place it on sturdy axle stands. Disconnect the battery and use hooks …

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos