Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the "Service" light on a Peugeot Expert?

Model: Peugeot Expert Mark2, MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Service warning light

See other generations:
Video tutorial

To reset the "Service" light on a Peugeot Expert, start with the ignition off. Press the button located under the instrument cluster, usually near the odometer, and hold it down. Turn on the ignition while continuing to hold the button.

After a few seconds, a countdown will appear on the display; keep holding until it reaches zero. When the countdown finishes, release the button, and the system will confirm that the light has been reset.

At this point, you can turn off the ignition. When you turn it back on, the light should no longer appear, indicating that the reset was successful.


Updated on 3 November 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Peugeot Expert?
How to Reset the Service Light on the Peugeot Expert?
Peugeot Expert (2008-2016 / Mark2, MK 2) To reset the service light on the Peugeot Expert, press and hold the button located on the right side of the instrument panel while it is off. Next, …
How to Reset the Service Light on a 2018 Peugeot Expert
How to Reset the Service Light on a 2018 Peugeot Expert
Peugeot Expert (2016-2025 / Mark3, MK 3) On all Peugeot vehicles, the procedure to reset the service light is similar. To reset the service light on a 2018 Peugeot Expert, first keep the ins…
Reset the Engine Oil Warning Light on the Peugeot Expert
Reset the Engine Oil Warning Light on the Peugeot Expert
Peugeot Expert (2016-2025 / Mark3, MK 3) Follow the procedure to reset the engine oil maintenance warning light on the Peugeot Expert. First, get in the vehicle and press and hold the "set" …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos