Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you program the key of the Peugeot 308?

Model: Peugeot 308 T9, MK 2 - Years 2013-2021
Part: Key

In order to program the key of the Peugeot 308, you need to insert it into the ignition switch, and then connect a diagnostic tool to the OBD port of the vehicle: this port will be located on the dashboard immediately below the steering column. Once the scanner is connected, you can select the model of the car and its corresponding version: then, following the steps to program, you can disconnect the scanner and verify that the new key has been coded correctly.

Posted on 23 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you program the key for the Peugeot 308?
How do you program the key for the Peugeot 308?
Peugeot 308 (2007-2014 / T7, MK 1) In this video guide, we will see how to program a coded key, or a brand new one, for a Peugeot 308, bearing in mind that the vehicle used in this dem…
How to Program the Key in the Peugeot 308 4
How to Program the Key in the Peugeot 308 4
Peugeot 308 (2021-2026 / P5, MK 3) Programming or reprogramming a key/remote for a car, in this case for the Peugeot 308, is done as follows: access the vehicle's interior, close all d…
How do you program the key of the Peugeot 308?
How do you program the key of the Peugeot 308?
Peugeot 308 (2013-2021 / T9, MK 2) To program the key of the Peugeot 308, you need to insert the blank key into the corresponding slot: by doing so, it will be possible to proceed by c…

Other guides you may be interested in

    Frequently Asked Questions

    • 308 2013-2021 - What to do if the key is not detected in the Peugeot 308? Read answer
    • 308 2013-2021 - How to replace the key battery in the Peugeot 308? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos