Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 308
    4. : How to remove an exterior mirror on Peugeot 308

Peugeot 308 - Video tutorial

Model: Peugeot 308 T7, MK 1 - Years 2007-2014
Part: Outside rearview mirror
Operation: How to remove an exterior mirror on Peugeot 308

How do i remove the exterior mirror of the car? Let's see in this video how to disassemble an external mirror on Peugeot 308: with a plastic lever we remove the cover placed on the mirror, we unscrew the mirror clamping pins with a screwdriver insert (around the plastic base), we disconnect the clamp of the mirror power supply. We remove the mirror with the power cables from the car door. To reassemble: reassemble the mirror with the power cables and the locking pins placed on the plastic that is fixed on the door sheet. Finally, we test the correct functioning of the mirror.


Posted on 14 October 2023 by ScegliAuto



How to remove the exterior mirror on Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) Let's see how to remove the exterior rear-view mirror of a Peugeot 308 (driver's side): remove the inner lining of the mirror with a lever (where the
How to replace the side indicator in the mirror of a Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) How to replace the side indicator on the exterior mirror of a Peugeot 308? Let's see in this video how to proceed: with a lever with a plastic or rub
How to remove the mirror on Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) Let's see how to proceed with the disassembly of a mirror with mirror on Peugeot 308. With a lever with a plastic or rubber coating, let's pry betwee

    Frequently Asked Questions

    • 308 2013-2021 - Why don't the mirrors of the Peugeot 308 open? Read Answer
    • 308 2007-2014 - What to do if the mirrors of the Peugeot 308 do not open? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos