|
Do it yourself
| |||
| ||||
How to reset the "Service" indicator on a Peugeot Partner?
Model: Peugeot Partner Tepee
MK 3
- Years:
2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Video tutorial
To reset the "Service" light on a Peugeot Partner, turn on the instrument panel without starting the engine. Look for the button located under the instrument panel, usually on the left side or near the central display. Press and hold the button while turning off and on the instrument panel. During this operation, an indication will appear on the display to confirm the maintenance interval reset. Release the button and, if required, press it again to complete the reset. The "Service" light should turn off. It is important to make sure you have replaced the engine oil and filter before proceeding with this operation, as the system will be set to monitor the new maintenance interval. If you encounter difficulties or have doubts, refer to the vehicle's user manual or seek assistance from a qualified technician. This procedure does not require specific tools, but must be performed correctly to ensure the proper functioning of the maintenance system.
Posted on 4 January 2025 by ScegliAuto
Related tutorials
Peugeot Partner Tepee
(2018-2026 /
MK 3)
In the following article, we will see how to reset the service indicator light of the 2019 Peugeot Partner in case it is not done by the workshop tha…
Peugeot Partner Tepee
(2008-2018 /
B9)
Typically, the service light on your 2015 Peugeot Partner disappears from the instrument cluster display automatically after performing the regular s…
Peugeot Partner Tepee
(2018-2026 /
MK 3)
In this guide we will see the information that will allow us to reset the service light of the regular maintenance of the oil change of the Peugeot P…
Other guides you may be interested in
|
How to Reset the Tire Pressure Light on a MG ZS?
On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.050
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
