Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Peugeot 508?

Model: Peugeot 508 MK 1 - Years 2010-2018
Part: Service warning light

The Service indicator that is shown on the instrument panel of the Peugeot 508 can be reset by holding down the button 000 located in the central lower part of the instrument panel while it is turned off. By continuing to hold down this button, you can insert the ignition key into the ignition switch and turn it to start the panel. Once it is turned on, you will notice a countdown during which you must continue to hold down the button; at the end of the countdown, you can release the button and turn off the panel.

Posted on 16 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Peugeot 508
How to Reset the Service Light on the Peugeot 508
Peugeot 508 (2010-2018 / MK 1) Resetting the service light for the car service on a Peugeot 508 follows simple and quick steps that can be done independently. Peugeot vehicles, lik…
How to Reset the Service Light on a Peugeot 508
How to Reset the Service Light on a Peugeot 508
Peugeot 508 (2010-2018 / MK 1) To reset the service light on a Peugeot 508 - after completing the required services - close all four doors of the vehicle. Turn on the ignition: you…
How to reset the service light on the Peugeot 508
How to reset the service light on the Peugeot 508
Peugeot 508 (2018-2026 / MK 2) To correctly reset the service light of your second series Peugeot 508, simply follow the procedure described. The entire operation requires very lit…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos