Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the timing belt of the Peugeot 5008?

Model: Peugeot 5008 MK 1 - Years 2009-2016
Part: Timing belt

To replace the timing belt of the Peugeot 5008, you need to lift the car so that the right front wheel is not in contact with the ground. Once the car is lifted, you can loosen the nuts that secure the right front wheel and the corresponding wheel arch: this will allow access to the belt tensioner pulley, which can be removed by loosening the central nut. At this point, you can remove the pulley and reduce the tension of the belt, inserting the new one and checking that everything works properly.

Posted on 6 February 2025 by ScegliAuto

Video tutorial

Related tutorials

Guide to replacing the timing belt of the Peugeot 5008 1.6 HDi
Guide to replacing the timing belt of the Peugeot 5008 1.6 HDi
Peugeot 5008 (2009-2016 / MK 1) Below we will discover the information that will show us how to disassemble and replace the timing belt of the Peugeot 5008 1.6 HDi. First, we open t…
How do you replace the timing belt of the Peugeot 5008?
How do you replace the timing belt of the Peugeot 5008?
Peugeot 5008 (2009-2016 / MK 1) In order to replace the timing belt of the Peugeot 5008, you need to lift the car so that the right front wheel does not touch the ground: the wheel …
How often should the timing belt of the Peugeot 5008 be replaced?
How often should the timing belt of the Peugeot 5008 be replaced?
Peugeot 5008 (2017-2024 / MK 2) The timing belt of the Peugeot 5008, like any other vehicle, must be strictly replaced at intervals dictated by the manufacturer, as neglecting this …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos