Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the timing belt of the Peugeot 5008 1.6 HDi

Model: Peugeot 5008 MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Timing belt

See other generations:
Video tutorial

Below we will discover the information that will show us how to disassemble and replace the timing belt of the Peugeot 5008 1.6 HDi. First, we open the hood of the car and start disassembling and removing the engine support, unscrewing the fixing screws; then we loosen the tensioner, disconnecting the alternator belt.

At this point, we lift the car and remove the crankshaft pulley, removing the distribution cover; we take the necessary references for the replacement of the timing belt, installing the new original one. If necessary, we replace the water pump kit, following the video tutorial until the end.


Posted on 13 November 2025 by ScegliAuto


Related tutorials

How and When to Replace the Timing Belt on a Peugeot 5008 1.5 Blue HDI
How and When to Replace the Timing Belt on a Peugeot 5008 1.5 Blue HDI
Peugeot 5008 (2017-2024 / MK 2) Today's guide will provide key information on replacing the timing belt on a Peugeot 5008 1.5 Blue HDI; the manufacturer recommends changing the belt…
Guide to Replacing the Clutch on the Peugeot 1.6 HDi
Guide to Replacing the Clutch on the Peugeot 1.6 HDi
Peugeot 5008 (2009-2016 / MK 1) Today's main instructions will show you the procedure for dismantling and replacing the clutch kit on the Peugeot 5008 1.6 HDi. First, raise the vehi…
How to Reset the Service Light on a Peugeot 5008
How to Reset the Service Light on a Peugeot 5008
Peugeot 5008 (2017-2024 / MK 2) To manually reset the service light on your second-generation Peugeot 5008, follow the procedure outlined in this guide. First, get into the car and …

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos