Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Clutch on the Peugeot 1.6 HDi

Model: Peugeot 5008 MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Clutch

See other generations:
Video tutorial

Today's main instructions will show you the procedure for dismantling and replacing the clutch kit on the Peugeot 5008 1.6 HDi. First, raise the vehicle and begin removing the left front wheel; then drain the engine oil as shown in the video. At this point, dismantle the front driveshaft, lowering the vehicle to remove the battery and battery tray; undo all the transmission bolts to access the clutch discs; replace the discs and, if necessary, the flywheel, following the video tutorial to the end!


Updated on 16 October 2026 by ScegliAuto


Related tutorials

How and When to Replace the Timing Belt on a Peugeot 5008 1.5 Blue HDI
How and When to Replace the Timing Belt on a Peugeot 5008 1.5 Blue HDI
Peugeot 5008 (2017-2024 / MK 2) Today's guide will provide key information on replacing the timing belt on a Peugeot 5008 1.5 Blue HDI; the manufacturer recommends changing the belt…
Guide to replacing the timing belt of the Peugeot 5008 1.6 HDi
Guide to replacing the timing belt of the Peugeot 5008 1.6 HDi
Peugeot 5008 (2009-2016 / MK 1) Below we will discover the information that will show us how to disassemble and replace the timing belt of the Peugeot 5008 1.6 HDi. First, we open t…
What to Check Before Buying a Used Peugeot 5008
What to Check Before Buying a Used Peugeot 5008
Peugeot 5008 (2009-2016 / MK 1) Before purchasing a used Peugeot 5008, the most important thing to clarify is which engine and gearbox it has. The reliability difference between the…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos