Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlamp Bulb on a Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Headlight

Open the bonnet and proceed to replace the front headlamp bulb. If you are replacing the right headlamp (when viewed from the driver's seat), first remove the filler neck and the washer fluid reservoir tube. Once this is done, the rest of the procedure applies to both headlamps. Remove the rubber cover protecting the electrical contacts. Disconnect the electrical connector from the bulb you wish to replace. Release the spring that secures the bulb by pressing the top part and moving it to the right. Pull out the bulb and replace it with the new one. Repeat the steps in reverse to secure the bulb and reassemble everything.

Updated on 2 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear headlight bulb of the Peugeot 206
How to replace the rear headlight bulb of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Today we will explain how to replace the rear headlight bulb of a 2001 Peugeot 206 car. To replace the bulb, we need to open the trunk and remove the…
How to Replace the Number Plate Bulb in a Peugeot 206
How to Replace the Number Plate Bulb in a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) In this video, see how to replace the number plate bulb on a Peugeot 206. Using a screwdriver, remove the number plate light located in the rear bump…
How to replace the front headlight bulb of the Peugeot 206
How to replace the front headlight bulb of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) To replace the headlight bulb of the Peugeot 206, we need to open the front hood and remove the windshield washer fluid tank, in order to have more r…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos