Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the door panel of the Peugeot 308

Model: Peugeot 308 T7, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Door trim panel

See other generations:
Video tutorial

In this video, we see how to change the door panel of the Peugeot 308: we start by removing the chrome part of the internal handle. Underneath, we will find a screw to remove, and another one under the door handle.

There is a third screw at the bottom of the panel. Once these three screws are removed, we can start prying, starting from the bottom: now there are only clips to snap off. In the middle of the panel, we will find a metal clip that we will try to remove with a small hook; once removed, we gently pull the panel towards us, and then disconnect the electrical connector of the window lifter and the speaker.


Posted on 21 February 2025 by ScegliAuto


Related tutorials

How to Remove the Rear Door Panel of a Peugeot 308 SW
How to Remove the Rear Door Panel of a Peugeot 308 SW
Peugeot 308 (2013-2021 / T9, MK 2) Before starting, open the rear door of your Peugeot 308 SW. Begin by prying out and removing the insert from the door panel's pillar using a thin but…
Disassembly of the rear door panel of the Peugeot 308
Disassembly of the rear door panel of the Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) In this short guide, we will see the instructions that will allow us to disassemble the rear door panel of the Peugeot 308. First, we open the rear d…
Removing the Door Panel of a Peugeot 308
Removing the Door Panel of a Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) Today, we will see in this video tutorial how to remove the front door panel of the Peugeot 308, following the instructions below. First, open the fr…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos