Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear door panel of the Peugeot 508 MK2

Model: Peugeot 508 MK 2 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Door trim panel

See other generations:
Video tutorial

In this video we can see how to remove the inner panel of the rear door of a Peugeot MK2: the first thing to do is to remove the finish of the inner handle, in order to expose the fixing screws underneath, including the one in the deepest hole. Another screw can be found at the bottom of the panel, in its central lower part; still, we will find another one inside the panel's storage compartment.

Once all these screws are removed, the panel is only held by clips, and holding it from the bottom side, pull it towards us; disconnect the connections of the electric window lifter, and the panel is removed.


Posted on 23 February 2025 by ScegliAuto


Related tutorials

How to Remove the Rear Door Panel on a Peugeot 508
How to Remove the Rear Door Panel on a Peugeot 508
Peugeot 508 (2010-2018 / MK 1) In this short and simple guide, discover the instructions that will allow you to remove the rear door panel on a Peugeot 508. First, open the rear do…
How to Remove the Rear Door Panel on a Peugeot 508
How to Remove the Rear Door Panel on a Peugeot 508
Peugeot 508 (2010-2018 / MK 1) How do you remove the left rear door panel of a Peugeot 508? Follow these steps in this video. Before starting the disassembly, disconnect the batter…
How to replace the reverse light bulb of the Peugeot 508
How to replace the reverse light bulb of the Peugeot 508
Peugeot 508 (2018-2026 / MK 2) In this new mini guide aimed at those of you who own a second edition Peugeot 508, we will explain how you can quickly and safely replace the reverse…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos