Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Cleaning the MAF sensor of the Peugeot 308 T9

Model: Peugeot 308 T9, MK 2 - Years 2013-2021
Part: Checks and maintenance

To clean the MAF sensor of the Peugeot 308, open the front hood, unscrew the three torx screws of the air filter cover, remove the breather tube, slide out the flexible tube from the cover, disconnect the electrical connector of the sensor, remove the cover and place it on a work surface. Spray a cleaner spray based on isopropyl alcohol on the sensor, which can be found in the outlet tube fitting, dry thoroughly using a hairdryer. Put the cover back in place, screw in the three screws, reattach the breather tube and the outlet duct, and insert the electrical connector.

Posted on 3 March 2025 by ScegliAuto

Video tutorial

Related tutorials

Cleaning the MAF sensor of the Peugeot 308 MK1
Cleaning the MAF sensor of the Peugeot 308 MK1
Peugeot 308 (2007-2014 / T7, MK 1) To clean the MAF sensor of the Peugeot 308, we open the engine hood, remove the plastic cover, loosen the clamps of the tube that carries air to the …
Replacing Temperature Sensor on Peugeot 308 HDI
Replacing Temperature Sensor on Peugeot 308 HDI
Peugeot 308 (2007-2014 / T7, MK 1) In this video tutorial, you will learn how to remove the temperature sensor from a Peugeot 308 HDI. The temperature sensor is a crucial component tha…
Dismantling and Cleaning the Particulate Filter on the Peugeot 308
Dismantling and Cleaning the Particulate Filter on the Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) Here are the instructions for dismantling the particulate filter on the Peugeot 308. First, open the bonnet of your car and start unscrewing the fixi…

Other guides you may be interested in

    Frequently Asked Questions

    • 308 2013-2021 - Why is the Peugeot 308 not connecting to Bluetooth? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos