Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 308
    4. : Peugeot 308 HDI temperature sensor replacement

Peugeot 308 - Video tutorial

Model: Peugeot 308 MK 1, T7 - Years 2007-2014
Part: Coolant temperature sensor
Operation: Peugeot 308 HDI temperature sensor replacement

In this video tutorial we will see how to remove the temperature sensor of a Peugeot 308 HDI. The temperature sensor is a very important component that must always work in order to check the correct engine temperature. To disassemble it we must first open the engine hood and we are going to disassemble the air sleeve in order to extract it. The sensor is located just below the sleeve. We disconnect the connector and go to disassemble it by replacing the sealing o-ring, as shown in the video. Clean the contacts with special products and reassemble everything.


Posted on 12 December 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos