Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly and replacement of the alternator of the Peugeot 308 1.6 HDI.

Model: Peugeot 308 T7, MK 1 - Years 2007-2014
Part: Alternator

The following steps will show us how to proceed with the disassembly and replacement of the alternator of the Peugeot 308 1.6 HDI. First of all, we open the car's engine hood and start by disconnecting the battery as a precaution; then we disconnect the two intake hoses of the intercooler and disconnect the V-belt from the pulleys, as shown in the video. At this point, we disconnect the electrical wiring of the alternator and unscrew its fixing screws to remove it and replace it with the new original one; we apply the reverse procedure for reassembly!

Posted on 5 October 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the timing belt of the Peugeot 308 1.6 HDI
Replacement of the timing belt of the Peugeot 308 1.6 HDI
Peugeot 308 (2013-2021 / T9, MK 2) Below we will discover the instructions for disassembling and replacing the timing belt of the Peugeot 308 1.6 HDI. First, we open the hood of the ca…
Replacing the Timing Belt and Water Pump on the Peugeot 308 1.6 HDI
Replacing the Timing Belt and Water Pump on the Peugeot 308 1.6 HDI
Peugeot 308 (2013-2021 / T9, MK 2) Today, let's go through the steps necessary to remove and replace the timing belt and water pump on the Peugeot 308 1.6 HDI. First, raise the vehicle…
Disassembly and replacement of the battery of the Peugeot 308 1.6 HDI.
Disassembly and replacement of the battery of the Peugeot 308 1.6 HDI.
Peugeot 308 (2007-2014 / T7, MK 1) Below we discover the instructions that will allow us to disassemble and replace the battery of the Peugeot 308 1.6 HDI, in simple steps. First, we o…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos