Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the sunroof of the Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Checks and maintenance

Today we will discover the instructions that will allow us to reset and calibrate the sunroof of the Peugeot 206. First of all, we get into the car and start pressing and holding the sunroof button for at least ten seconds; in this way we will reset the motor and the mechanism of the sunroof, as shown in the video. At this point, we repeat the operation for closing the sunroof, checking afterwards the correct functioning; if the problem is not solved, we try disconnecting the battery terminals.

Posted on 11 March 2025 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 206 (1998-2012 / MK 1) In this brief guide, we will see the instructions that will allow us to open and close the sunroof of the Peugeot 206. First, let's get inside the ve…
Peugeot 206 (1998-2012 / MK 1) If there are issues with the roof on a Peugeot 206 cc, it is advisable to take it to a mechanic as the problem may be a component of the roof opening…
Peugeot 206 (1998-2012 / MK 1) This guide shows how to replace the driver's seat on the Peugeot 206 cc GTI Mk1. Open the vehicle's sunroof and disconnect the battery to prevent any…

    Frequently Asked Questions

    • 206 1998-2012 - Where is the outside temperature sensor of the Peugeot 206 located? Read answer
    • 206 1998-2012 - How to intervene when problems arise with the indicators of the Peugeot 206? Read answer
    • 206 1998-2012 - Where is the inertia switch on the Peugeot 206? Read answer
    • 206 1998-2012 - Where is the Peugeot 206 petrol pump relay located? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos