Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the cabin fan of the Peugeot 508.

Model: Peugeot 508 MK 1 - Years 2010-2018
Part: Blower motor

This short and simple guide will show us how to disassemble and replace the cabin fan along with its motor in the Peugeot 508. First, we get on board the vehicle and start disassembling and removing the glove compartment; then we unscrew the fixing screws of the cabin fan, disconnecting its electrical wiring to remove it, as shown in the video. At this point, we carry out the repair or replacement of the cabin fan, connecting it and checking its operation before reassembling the glove compartment!

Posted on 22 March 2025 by ScegliAuto

Video tutorial

Related tutorials

Guide to replacing the cabin fan on the Peugeot 508
Guide to replacing the cabin fan on the Peugeot 508
Peugeot 508 (2010-2018 / MK 1) In this guide, we will discover the steps and instructions that will allow you to remove and replace the cabin fan on the Peugeot 508. First, open th…
Where are the fuses located in the Peugeot 508?
Where are the fuses located in the Peugeot 508?
Peugeot 508 (2018-2026 / MK 2) The fuse boxes present on the Peugeot 508 serve to contain the fuses that regulate the functioning of the devices installed on the vehicle: in this t…
How to deactivate the "Eco" mode on a Peugeot 508?
How to deactivate the "Eco" mode on a Peugeot 508?
Peugeot 508 (2018-2026 / MK 2) Good morning, today's goal is to permanently deactivate the "Eco" mode on our Peugeot 508. Let's start by turning on the vehicle, pressing the igniti…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos