Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the seat airbag of the Peugeot 207 cc.

Model: Peugeot 207 MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Airbag

Video tutorial

Today we will discover the instructions that will allow us to disassemble and replace the front seat airbag of the Peugeot 207 cc. First, we open the front door (if the seat is not removed) and begin to remove the side cover of the airbag; then we disconnect the electrical connector of the airbag to remove the entire module from the seat, as shown in the video.

At this point, we install the new airbag module, inserting it in the correct direction, making the electrical connection; then we reset the airbag warning light with the appropriate diagnostic software.


Posted on 21 May 2025 by ScegliAuto


Related tutorials

How to Remove the Airbag from a Peugeot 207
How to Remove the Airbag from a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) In this video tutorial, follow the steps to dismantle and replace the steering wheel airbag of the Peugeot 207, as outlined below. First, get inside …
How to adjust the seat of the Peugeot 207
How to adjust the seat of the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Adjusting the seat of the Peugeot 207 is a simple and quick operation to be carried out independently as we simply need to use the levers located on …
How to replace the steering wheel airbag of the Peugeot 207
How to replace the steering wheel airbag of the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Replacing the airbag on a Peugeot 207 vehicle is a fairly simple operation to perform independently, taking the necessary precautions. Before removin…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos