|
Do it yourself
| |||
| ||||
How to replace the steering wheel airbag of the Peugeot 207
Model: Peugeot 207
MK 1
- Years 2006-2015
Replacing the airbag on a Peugeot 207 vehicle is a fairly simple operation to perform independently, taking the necessary precautions. Before removing the airbag, it is necessary to disconnect the vehicle's battery in order to prevent it from activating during the replacement operation, thus damaging the vehicle and the person performing the operation. After disconnecting the battery, get into the vehicle and turn the steering wheel to a vertical position, insert a flat-tipped screwdriver into the side hole and move the screwdriver inside the hole to activate the lever that will push the central body of the steering wheel outward. Remove the central body and disconnect the connector to deactivate the airbag. At this point, insert a new central body into the steering wheel and connect the connector. Reconnect the battery and start the vehicle to test that the assembly has been done correctly. It may happen that the airbag light flashes for a few seconds and then turns off, if not, further maintenance is required.
Posted on 15 November 2025 by ScegliAuto
Video tutorial
Related tutorials
Peugeot 207
(2006-2015 /
MK 1)
In this video tutorial, follow the steps to dismantle and replace the steering wheel airbag of the Peugeot 207, as outlined below. First, get inside …
Peugeot 207
(2006-2015 /
MK 1)
The airbag is undoubtedly one of the most important components of your car, as it ensures a high level of safety even in the event of a serious accid…
Peugeot 207
(2006-2015 /
MK 1)
Today we will discover the instructions that will allow us to disassemble and replace the front seat airbag of the Peugeot 207 cc. First, we open the…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.110
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |