Do it yourself
Frequently asked questions about cars and motorcycles

Where is the fuel pump fuse of the Peugeot 206 located?

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Fuse box

In case of failure of the fuel pump, the first operation to do is to check the status of the fuse. On Peugeot 206 vehicles produced from 1998 to 2012, the fuse in question is located inside the box in the engine compartment. The fuse is numbered with the number 15 and has a rating of 30 amperes. To replace it, we must open the front hood and release the fuse box cover; using a needle-nose pliers, we remove the damaged fuse, after identifying its position thanks to the diagram on the cover of the box. Once the new fuse is inserted, we start the vehicle to test the pump operation; in case of a positive outcome, we close the front hood.

Posted on 19 June 2025 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 206 (1998-2012 / MK 1) The Peugeot 206 has two fuse boxes. The first box is located in the engine bay, near the battery. The second box is located inside the cabin, under t…
Peugeot 206 (1998-2012 / MK 1) The fuel pump fuse of the Peugeot 206 is located inside the fuse box located in the engine compartment. To access the fuse in question, it is necessa…
Peugeot 206 (1998-2012 / MK 1) If the fuel pump in your Peugeot 206 has suddenly stopped working, the first step is to check the respective fuse, as indicated in this video. It is …

Other guides you may be interested in

    Frequently Asked Questions

    • 206 1998-2012 - Where is the Peugeot 206 starter motor relay located? Read answer
    • 206 1998-2012 - Where is the fuel pump fuse located on the Peugeot 206? Read answer
    • 206 1998-2012 - What is the cigarette lighter fuse for the Peugeot 206? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos